| |
- Negative
Slopes Equalizers are used to compensate the gain
slope in systems where large amounts of cabling may cause excessive
loss at higher frequencies over the operating band.
- Positive
Slopes Equalizers are primarily used for compensating
the gain variation in systems where long lengths of Waveguide may
cause excessive loss at the lower frequencies.
- Half Sine
Equalizers are mostly
used for compensating the gain variation present in wide band Traveling
Wave Tubes (TWTs) or solid state amplifiers where the maximum gain
is at or near mid-band.
- Iso Equalizers
Integrated with input and output isolators, these equalizers can
be installed practically anywhere in a system while providing isolation
to minimize any adverse effect, such as frequency pulling or mismatch
distortion.
- Fine
Grain Equalizers provide fine grain options to predistort
signal in the system so that the distoritng effect of the system/long
line will corrected. Combines with Linear Slopes Equalizers or Half
Sine Equalizers to allows system equalization and control over fine
grain ripple.
- Combines with
Harmonic Phase Shifters will allows traveling wave
tube (TWT) gain equalization, while providing harmonic injection
capabilities for gain enhancement.
|
|
|
|
